Sony UTXB40 Bodypack Transmitter CE42 (638-694MHz) frequency

High-Quality Sound with Digital Audio Processing

The UWP-D improves its analogue UHF transmission technology with digital audio processing. Transient sounds and consonants are reproduced with greater accuracy, resulting in clear, natural sound that is intelligible and nuanced. The Sony ECM-V1BMP lavalier mic is optimized for capturing clear and intelligible speech. This omnidirectional mic picks up sound from every direction, allowing for a variety of placement options and freedom of movement.

Automatic NFC Sync Mode

Press and hold the NFC/Sync button on the receiver and it scans for the cleanest RF channel. Simply hold the transmitter next to the receiver; it automatically syncs up and you are good to go. The Sony UTXB40 transmitter allows you to send a single mic to multiple cameras for broadcast applications. Fast NFC communication makes setup for multiple receivers a breeze.

Auto-Gain Mode to Prevent Mic Distortion

Auto-Gain mode saves you the time and aggravation of setting and managing the input level on the transmitter. It uses a limiter to help prevent distortion, great when the loudness of the presenter’s voice is unknown. The +15 dB Gain Volume-Boost mode boosts the mic gain by 15 dB to compensate for situations when the mic is not close enough to the presenter’s mouth and the audio level is insufficient.

High-Visibility OLED Display for Indoor/Outdoor Use

The unit features an easy-to-read OLED display. The quick response of the display lets you see the operating conditions clearly and accurately in real time, even in bright sunlight.

Multiple Powering Options

Two AA batteries (alkaline or NiMH rechargeable type) power the transmitter for up to 8 hours. The unit can also be powered through its USB-C port, allowing it to run for numerous hours on a USB power pack or indefinitely, if you have access to AC. A battery count-up timer allows for accurate reading of battery running time to minute accuracy.

Other Features

Switchable Mic/Line input level so you can set the correct gain level for your sound source. Low-cut filter reduces noise caused by wind or machinery—Off / Low (100 Hz) / Mid (150 Hz) / High (200 Hz). Simple menus make navigation easy. Advanced menus for in-depth control are also available. The variable mute button on the transmitter can be programmed for latched or momentary muting. It can also be used as a momentary talk button.