Sony Omni-Directional Lapel Microphone with XLR Connector
Ask A Question
Request a Quote
Call us on 1300 287 867 or fill out the form below and we’ll get back to you with a price quickly.
"*" indicates required fields
Fill out the form below and we'll get back to you with a quote as soon as possible.
- Ultra miniature, dual diaphragm design
- Design for quality-critical applications
- High sensitivity, wide dynamic range
- Reduces common cable noise
- Natural sound reproduction
The ECM-88B is a miniature omni-directional electret-condenser microphone ideally suited for quality-critical applications in broadcasting, theater and field production. The ECM-88B comes with a DC-78 power supply and it has a cable length of 2.5 metres. This model is best suited for wired lapel mic applications.
However; with the DC-78 power supply disconnected, the ECM-88B’s 4-pin (SMC9-4P) connector can also be used with Sony WRT-822B and WRT-8B wireless mic body-pack transmitters.
Low Handling Noise
The ECM-88B radically reduces handling noise, making it ideal for use in applications where users are moving.
Flat-and-wide Frequency Response
This extends the ECM-88B’s range beyond just speech reproduction, meaning it can be used for many high-quality sound applications.
Audio
| Capsule Type | Electret Condenser |
| Frequency Response | 20 Hz to 20 kHz |
| Directivity | Omni-directional |
| Sensitivity | -52 dB +/- 2 dB (when used with DC-78), (-39.0 dB 11.2 mV for BC) |
| Output Impedance | 30Ω±30%, Unbalanced 100Ω±20%, Balanced (when used with DC-78) |
| Dynamic Range | 99 dB or more |
| Signal-to-Noise Ratio | 68 dB or more |
| Inherent Noise | 26 dB SPL or less |
| Induction Noise from External Magnetic Field | 5 dB SPL or less |
| Wind Noise | 45 dB SPL or less (with supplied windscreen) |
| Maximum Input Sound Pressure Level | 125 dB SPL |
General
| Connector | SMC9-4P 4-pin on microphone. Also supplied with DC-78 Power Supply Unit for XLR-3-12C (male) output connection. |
| Mic Cable | 2.5 m |
| Power Requirements | ECM-88B with DC-78 Power Supply connected: Two-way powering; battery operation (AA-size battery) or external DC operation (12 V to 48 V) |
| Power Consumption | Internal battery: 0.3 mA or less External battery: 2 mA or less |
| Dimensions | φ3.5 x 16.8 mm (Mic head) φ20 x 144 mm (DC-78 power unit) |
| Weight | Approx. 160 g (with DC-78 power supply) Approx. 0.5 g (Mic Only) |
- Omni-Directional Lapel Microphone with XLR Connector
- Urethane type windscreen
- Single/vertical type tie clip
- Single/horizontal type tie clip
- Operating instructions
- Mic case
- Ferrite clamp
- Double/horizontal type tie clip
- DC-78 DC Power Supply Unit
Enquire about 'Sony Omni-Directional Lapel Microphone with XLR Connector'