Australia’s Most Experienced Audio Visual Supplier

Australia’s Most Experienced Audio Visual Supplier

NEED HELP? 1300 287 867

Rode Stereo VideoMic Pro Rycote On-Camera Microphone.

  • High value stereo option for videographers
  • Wide stereo image with natural depth
  • Separation from exterior physical factors
  • Ergonomic form factor
  • Equalisation and power controls


Original price was: $399.00.Current price is: $359.00.


High Value Stereo Option

The innovative Rode Stereo VideoMic Pro Rycote On-Camera Microphone delivers a high value stereo option for videographers, as well as being great for recording music and the distinctive ambiance, crucial in structuring an accurate audio scene.

Constructed around the all new capsule with its coordinated pair of high sensitivity ½”cardioid condensers in a coincident XY pair, the Rode Stereo VideoMic Pro Rycote On-Camera Microphone delivers a wide stereo image with natural depth.

Separation From Exterior Physical Factors

One more new addition is the unified Rycote® Lyre® based shock mounting system, which splits the Stereo VideoMic Pro capsule and electronics from its mount, delivering separation from exterior physical factors that may cause unwelcome vibrations and rumble in the mic. Made from a single piece of hard-wearing thermoplastic, the Lyre® affords greater acoustic suspension to traditional elastic solutions and will not snap, sag or wear out.

Ergonomic, Lower Noise Transference & Higher Sensitivity

The Rode Stereo VideoMic Pro Rycote On-Camera Microphone, with its ergonomic form factor, makes it seamlessly suitable for large-sensor video cameras, consumer camcorders and DSLRs.

The newly designed Kevlar strengthened braided cable, as well as the enhanced foam windscreen, affords outstanding acoustic decoupling from the camera and gives you meaningfully lower noise transference and higher sensitivity.

Equalisation & Power Controls

The easy to use rear of the mic body gives you equalisation and power controls with a high pass filter at 75Hz which is intended to cut out the noise produced by traffic, air conditioning and other unwelcome low frequency nosiness.

A -10dB PAD lets the user to decrease the sensitivity of the mic, making it appropriate for recording  sources such as sporting events or live music concerts.

Deliver A Higher Value Signal With DSLR Cameras

Similar the VideoMic Pro, the Stereo VideoMic Pro features a +20dB level boost precisely intended to deliver a higher value signal with DSLR cameras. When initiated, the archetypally low value camera preamp level can be abridged, resulting in a much clearer recording and a lower noise floor.

Ten Year Warranty

The Rode VideoMic Pro Rycote Stereo On-Camera Microphone is designed and made in Australia. It is also covered by Rode Mics’ industry leading ten year warranty.

Key Features

  • Ten year extended warranty when you register your mic online
  • Billeted metal camera shoe mount with 3/8” thread for simple boom pole mounting
  • New Kevlar strengthened braided cable
  • 9V battery powered – over 100 hours use (alkaline)
  • Three position level control (-10dB, 0, +20dB)
  • Two step High Pass Filter (flat, 75Hz)
  • On mic EQ and power controls
  • Compact, ultra lightweight form factor
  • Enhanced foam windscreen
  • All new matched pair 1⁄2” condenser capsules in XY stereo config
  • Broadcast recording value on-camera mic
  • Rycote® Lyre® shock mounting onboard


  • Acoustic Principle: Pressure Gradient
  • Active Electronics: JFET impedance converter
  • Capsule: 0.50″
  • Address Type: End
  • Frequency Range: 40Hz – 20kHz
  • Output Impedance: 200Ω
  • Maximum SPL: 134dBSPL
  • Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  • Equivalent Noise Level (A-weighted): 18dBA
  • Weight: 116g
  • Dimensions: 134mmH x 80mmW x 115mmD
  • Warranty: 1 year with free extension to 10 years following registration online

Enquire about 'Rode Stereo VideoMic Pro Rycote On-Camera Microphone'

  • This field is for validation purposes and should be left unchanged.

Hire Enquiry & Booking

Call us on 1300 287 867 or fill out the form below with what you need and we’ll get back to you quickly.

"*" indicates required fields

This field is for validation purposes and should be left unchanged.