Litepanels Gemini 2x1 Bi-Colour LED Panel Light Soft

Description

Flexibility And Control

Litepanels Gemini 2×1 Bi-Color LED Panel Light Soft offers you flexibility and control. This aluminium constructed, 25.0 x 6.5 x 12.5″ LED panel fixture has three lighting modes.

1. CCT Colour Temperature

The CCT colour temperature controller has six factory pre-sets in increments from 2700 to 6000K.  There are also six pre-sets for user-defined colour temperature and plus/minus green control.

2. HSI Colour

The HSI Colour mode allows you to adjust the intensity, hue and saturation.

3. Gel Mode

Gel mode permits you to choose from a collection of filters frequently utilised by image makers.

Lighting Effects Mode

A firmware update offers a Lighting Effects Mode that includes;

• Party Lights
• Pulse
• Emergency Lights
• Fireworks
• Squares
• Fire
• Strobe
• Paparazzi
• Hue Burst
• TV Simulation

Precise Colour Rendering

The light has a CRI/TLCI rating of 97 for daylight balance and 99 for tungsten balance, signifying a very precise rendering of colour. The Gemini light panel is dimmable from 100% to 0% without flicker or colour shift. Options and features are shown on the rear LCD screen.

Built In DMX

All of these modifications can be made locally on the unit or remotely via a console, thanks to the Gemini’s built in DMX. There’s even the choice of wireless DMX or Bluetooth control via a separately bought remote module.

Worldwide Use

The Gemini panel light is equipped for worldwide use thanks to its built in 100 to 240 VAC power supply, but it can also run on batteries when power is inaccessible.

Convenience Features

The Gemini LED flat panel light has a number of convenience features, such as the ability to stack and gang several lights together with an optional yoke and hardware. You can also daisy-chain several lights together in Master/Slave mode, permitting a single designated “Master” light to control the others. This version of the Gemini LED panel light ships with a typical yoke and a power cable with bare ends.

Three Lighting Modes

• Gel mode permits that an assortment of gels can be selected from the menu
• HSI Colour mode permits full colour control over hue, saturation and intensity
• CCT (Correlated Colour Temperature) mode allows for bi-colour (daylight to tungsten) operation with the addition of plus and minus green adjustment

Photometrics

Tungsten

• 385 lux / 36 fc @ 15′ (4.6 m)
• 906 lux / 82 fc @ 10′ (3.0 m)
• 3624 lux / 326 fc @ 5.0′ (1.5 m)

Daylight

• 459 lux / 43 fc @ 15′ (4.6 m)
• 1079 lux / 97 fc @ 10′ (3.0 m)
• 4317 lux / 389 fc @ 5.0′ (1.5 m)

Durability & Design Features

• Barndoor/honeycomb accessory rails
• LCD screen displays important settings and status
• Aluminium core construction to deliver maximum resilience and superior thermal management
• Robust, industry standard powerCon locking power connector with capability to daisy chain power
• Yoke with Junior pin for simple mounting and positioning

Power Options

AC/DC power with DC battery power via three-pin XLR.

Control

• Instinctual and ergonomic controls for fixture set up, dimming and colour.
• Optional Bluetooth and wireless DMX modules allow the cooling, brightness and colour mode to be remote controlled.
• Master/Slave mode – connect several lights together and control them all from a single master light.

Pre-Sets

Program user pre-sets on Channel A, which records intensity and colour. It also has factory pre-sets on channel B with increments for 2700K to 6000K plus six user-programmable pre-sets.

Performance

• No hefty exterior ballast or restrike period.
• Energy efficient – fixture draws only 325W nominal.
• Smooth dimming from 100% to 0%, with no colour shift.
• Flicker-free at any frame rate or shutter angle at any intensity level.