EIZO ColorEdge CG3100X

Enhanced Display Quality

The CG3100X offers exceptional visual performance with high brightness, high contrast, and HDR support. Featuring a brightness level of 500 cd/m2 and a contrast ratio of 1800:1*, the monitor meets DCI standards to ensure content is displayed clearly with added depth and detail.

For HDR content, the monitor supports the gamma (EOTF) compatible hybrid log-gamma (HLG) transfer function for broadcasting and perceptual quantization (PQ) curve for production of films and streamed content. Additionally, users can set any camera log using ColorNavigator 7 to view the camera log video on the monitor during filming.

*Typical value when DUE Priority is set to “Brightness”.
EOTF stands for Electro-Optical Transfer Function.
HLG and PQ were standardized by the International Telecommunication Union (ITU) as ITU-R BT.2100. PQ was standardized by the Society of Motion Picture Television engineers (SMPTE) as ST-2084.

DCI 4K Resolution Across a 30.5-inch Screen

The CG3100X displays at DCI 4K resolution (4096 x 2160) which is more than four times that of Full HD (1920 x 1080). This makes it an optimal solution for creating, editing, and referencing 2D and 3D CGI, VFX, compositing, and colour grading.

Colour Precision

Industry Standard Color Reproduction with Broadcast and Cinema Presets
The monitor’s wide colour gamut covers 99% of the DCI-P3 standard used in digital cinema and supports the BT.2020 standard used in broadcasting for exceptionally faithful reproduction of colour. It also covers 97% of the Adobe RGB colour space so images and video shot in Adobe RGB will be displayed correctly. Colour mode presets can easily be changed via the switches on the front of the monitor, enabling straightforward colour management for each project.

10-Bit Simultaneous Display

The monitor offers 10-bit simultaneous display* from a 24-bit look-up-table (LUT) which means it can show more than one billion colours simultaneously. This is 64 times more colours than you get with 8-bit display, resulting in smooth colour gradations and reduced Delta-E between two adjacent colours.

*A graphics board and software which support 10-bit output are also necessary for 10-bit display. Equipment that supports DeepColor is required for 10-bit display when connected via HDMI® port.

3D LUT for Accurate Colour Display

The monitor is equipped with a 3D LUT (look-up table) which adjusts colours on an RGB cubic table. Using ColorNavigator 7’s film emulation function, users can emulate film colour properties using a 3D LUT file.

・Japan patent no. 4808588

Built-In Sensor to Automate Your Workflow

The monitor’s built-in sensor can be set to calibrate the monitor automatically at designated times. This eliminates the need for a third-party calibration device and ensures your screen stays colour-accurate. In addition, the sensor swings onto the screen, taking up minimal space and allowing you to continue working even during calibration.

・Japan patent no. 4809453
・EIZO does not recommend carrying out colour-critical work during recalibration, as the screen’s colours will be adjusted.

Built-In Sensor to Automate Your Workflow

ColorNavigator 7 Colour Management Software
EIZO’s proprietary free ColorNavigator 7 software is the complete colour management solution for reliable calibration and quality control of ColorEdge monitors. It offers multiple preset colour modes, simultaneous calibration of all modes, and automatic recalibration to ensure consistent colour accuracy. It also allows calibration targets to be set for brightness, white point, gamma (EOTF), and colour gamut for more fine-tuned control.