Australia’s Most Experienced Audio Visual Supplier
Australia’s Most Experienced Audio Visual Supplier
NEED HELP? 1300 287 867
Australia’s Most Experienced Audio Visual Supplier
Australia’s Most Experienced Audio Visual Supplier
NEED HELP? 1300 287 867
Fast delivery anywhere in Australia
$1,892.00
Each input is independent and features low latency buffering, which allows the device to display all four inputs on the optional monitor screen simultaneously, even when each input signal is a different format, frame rate or aspect ratios being displayed on the screen of your monitor’s SDI or HDMI input. The DECIMATOR MD-QUAD is a Quad split Multi-Viewer with 3G/HD/SD SDI & HDMI Outputs and adds a test pattern generator, audio tone generator, audio channel pass through, and on-screen display on an optional connected monitor. The device provides you with an SD/HD/3G-SDI quad splitter or multiplexer. It features four auto detecting SDI inputs, and outputs to an SDI and an HDMI output.
SDI Input & Output Formats
3G – SMPTE 424M@2.97 and 2.967 Gb/s
1080p: 60/59.94/50 Hz
HD – SMPTE 292M/274M/296M@1.485 and 1.435 Gb/s
1080p/psf: 30/29.97/25/24/23.98 Hz
1080i: 60/59.94/50 Hz
720p: 60/59.94/50/30/29.97/25/24/23.98 Hz
SD – SMPTE 259M@270 Mb/s
525i: 59.94 Hz
625i: 50 Hz
Inputs: SD/HD/3G-SDI: 4 x BNC
Outputs
SD/HD/3G-SDI: 1 x BNC (10-bit SD-SD Re-Clocked)
HDMI: 1 x HDMI
LED Indicators: Power
Signal Lock and Rate: 4 x
Power: 5 to 24 VDC, 6 W, Pin Pos Connector
Dimensions: 90 x 94 x 23 mm
Enquire about 'Decimator MD-QUAD split Multi-viewer, SDI and HDMI outputs'
Decimator MD-QUAD split Multi-viewer, SDI and HDMI outputs
Need more info on this product? Fill out your details below and we'll get back to you quickly.
Let us know where you've seen it cheaper and we'll let you know if we can match it. When you buy from us, you're buying from the experts who use the equipment we sell every day, so you can count on us to give the best support.
"*" indicates required fields
Call us on 1300 287 867 or fill out the form below with what you need and we’ll get back to you quickly.
"*" indicates required fields
