Blackmagic HyperDeck Studio 4K Pro is an updated 1 RU file-based deck added 2x SD card slots, USB Type-C recording output, timecode input and output, Ref input and output, a redesigned jog/shuttle wheel, 10G Ethernet, and a speaker on the front.
The Studio 4K Pro records uncompressed video with 10-bit 4:2:2 colour using either ProRes or DNxHD codecs, as well as the H.264 and H.265 compression formats.
The 3-pin XLR timecode input and output allow you to sync timecode with other devices. It also allows you to daisy-chain with other devices to create a timecode sync chain.
The ports autodetect the signal and will adjust to the SD, HD, 6G-SDI, or 12G-SDI format input.
It features one 12G-SDI input, two 12G-SDI outputs, a loop-through 12G-SDI output, a dedicated SDI monitor output, and there’s also one HDMI input and one HDMI output that can all output up to DCI 4K.
The 4K Pro can even play ProRes 4444 files in true UHD for fill and key outputs.
Supports SD Cards, UHS-II Cards or SSDs
With 2x SSD slots and 2x SD card slots, you can record almost endlessly as it will automatically swap from one on to the other.
The SD card slots are also hot-swappable.
Using H.265, you can record up to 58 hours in 2160p60 Ultra HD or up to 157 hours of H.264 recording in 1080p59.94 on a 1TB card.
Fast Network File Transfers
The networking has been upgraded to 10G Ethernet built into the HyperDeck Studio 4K Pro, transfer speeds faster than the SD card or SSD media disks.
Built-In Timecode and Sync Generators
With a timecode and sync generator built into all models, you can stack multiple units for digital signage or multi-channel recording.
Provides instant power on while including powerful features such as LCD with video, timecode and audio metering, monitoring with overlays, menus, fast networking, multi-disk media management, 3D LUTs plus localization.
HyperDeck Studio 4K Pro can sustain data transfers at a massive 1.2 gigabytes per second on its 10G Ethernet connection.