Australia’s Most Experienced Audio Visual Supplier

Australia’s Most Experienced Audio Visual Supplier

NEED HELP? 1300 287 867

Sony 17" LMDA170 Full HD LCD Monitor for Studio and Field-use

Fast delivery anywhere in Australia

$4,290.00

  • Full HD picture monitor
  • Excellent cost-performance ratio
  • Incorporates a 17-inch Full HD
  • LCD panel and emulates broadcast standards
  • Ideal for studio and field applications
  • Consistency with PVM-A Series monitors

Overview

The LMD-A170 17-inch LCD monitor offers Full HD resolution, along with a lightweight and compact design. There is more than a 12% to 22% reduction in mass, 30% reduction in depth, and more than 25% reduction in power consumption, compared to Sony’s previous models. The LMD-A Series offers the same user-interface design, convenient features, functions and operability as PVM-A Series OLED picture monitors. Furthermore, LMD-A Series monitors provide versatility for a wide range of user applications both in the studio and in the field. These include DC operation, VESA mount, and yoke-mount holes, and an optional protection kit.

Other Features

Audio can be monitored using the 3.5mm headphone jack on the front panel, or with the 1W built-in speaker. A composite input with loop-out provides connectivity for standard-definition analog devices and is paired with a 3.5mm stereo mini-jack audio input. Two Ethernet ports provide connectivity for serial and parallel remotes; letting you control and load monitor settings via your network, as well as upgrade the monitor’s software. For use in the field, there is a 12V DC power input on 4-pin XLR.

Display
Panel Type IPS-Type LCD
Display Size 16.5″ / 42.2 cm
Active Area 14.40 x 8.10″ / 36.58 x 20.57 cm
Screen Resolution 1920 x 1080
Aspect Ratio 16:9
Viewing Angle Horizontal: 178° (89/89)
Vertical: 178° (89/89)
Image Controls Color Temperature Selection, Focus Peaking, Screen Markers, Waveform
I/O
Video 2 x BNC (3G-SDI) Output
1 x BNC (Composite) Output
2 x BNC (3G-SDI) Input
1 x HDMI Type A Input
1 x BNC (Composite) Input
Audio 1 x 3.5 mm Input
1 x 3.5 mm Monitor Output
1 x 3.5 mm Headphone Output
Built-In Speaker 1 x 1 W
Power 1 x 4-Pin XLR Input
Other I/O 1 x Parallel (8P8C)
1 x LAN (RJ45)
Card Slot None
Format Support
Video Format SDI (10-Bit 4:4:4 RGB and YCC)
1080PsF: 24/25/30
1080p: 24/25/30
1080i: 50/60
720p: 50/60
SDI (10-Bit 4:2:2 YCC)
1080p: 24/25/30/50/60
1080PsF: 24/25
1080i: 50/60
720p: 24/25/30/50/60
PAL
NTSC
HDMI
1080p: 24/25/30/50/60
1080i: 50/60
720p: 50/60
576p: 50
480p: 60
PAL
NTSC
PC Resolutions 640 x 480
1280 x 768
1280 x 1024
1360 x 768
1440 x 900
1680 x 1050
Power
AC Input Power 100 to 240 VAC, 50 / 60 Hz at 0.5 to 0.4 A
DC Input Power 12 to 17 VDC
Battery Type None
Power Consumption 49 W (Maximum)
42 W (Typical)
Mounting
Mounting-Hole Pattern 100 x 100 mm
Environmental
Operating Humidity 30 to 85%
Operating Temperature 32 to 95°F / 0 to 35°C
68 to 86°F / 20 to 30°C (Recommended)
Storage Humidity 0 to 90%
Storage Temperature -4 to 140°F / -20 to 60°C
General
Dimensions (W x H x D) 16.5 x 11.4 x 2.8″ / 420.2 x 288.8 x 70.2 mm
16.5 x 12.3 x 6.5″ / 420.2 x 311.3 x 165 mm, Including Feet
Weight 10.8 lb / 4.9 kg

Enquire about 'Sony 17" LMDA170 Full HD LCD Monitor for Studio and Field-use'

  • This field is for validation purposes and should be left unchanged.

Ask A Question About


Sony 17" LMDA170 Full HD LCD Monitor for Studio and Field-use

Need more info on this product? Fill out your details below and we'll get back to you quickly.

  • This field is for validation purposes and should be left unchanged.

Seen this item cheaper?

Let us know where you've seen it cheaper and we'll let you know if we can match it. When you buy from us, you're buying from the experts who use the equipment we sell every day, so you can count on us to give the best support.

"*" indicates required fields

Mailing List Signup

Hire Enquiry & Booking

Call us on 1300 287 867 or fill out the form below with what you need and we’ll get back to you quickly.

"*" indicates required fields

Name*
This field is for validation purposes and should be left unchanged.